Adic 4000 Bedienungsanleitung PDF herunterladen (Seite 57)

Cleaning the Tape Head 5-17

To clean the head, use a cleaning cartridge. Inert the cleaning

cartridge in the drive as described in

Loading the Data Cartridge

on page 5-12. The drive will automatically clean the head.

When the cleaning operation is complete, the beeper will

sound alerting you to remove the cleaning cartridge. The

following messages will be displayed during the cleaning

process.

Table 5-7 Cleaning Cycle LCD Messages

When tape is loaded.

DLTtype = DLT

4000 (4000DLT), or DLT

7000

(7000DLT).

Compressed if compression mode enabled or

Standard if compression mode disabled.

20/40GB = DLT4000, 35/70GB = DLT7000.

This is the normal “Ready Screen”.

While loading the cleaning

tape.

DLTtype = DLT

4000 (4000DLT), or DLT

7000

(7000DLT).

While the cleaning cycle is

executing.

When cleaning cycle is

completed.

When the cleaning process is complete, the LCD will

display the following for 3 to 5 seconds:

CCL ia the Cleaning Cartridge Load Counter and

equals the number of timews that6 a cleaning

cartridge has been loaded in this drive.

CCA is the cumulative number of times this cleaning

cartridge has been used to clean a drive.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 87 88

Keine Kommentare

Adic 4000 Bedienungsanleitung Seite 57